Once you have cut out your blank draw a centre line and mark on the line some reference points.
Measuring:
from the tip of the tail
to point 1 105 mm
point 2 125 mm
from the head
point 3 75 mm
point 4 45 mm
point 5 15 mm
at the tip of the head measure 1/8 “ either side of the centre line and draw a line to the outside of the head at point 5
draw lines parallel to the centre line from point 4 to point 1
remove the wood in the shaded area.
Proceed to round the top of the body
Leave a Reply